If you wish to purchase a thermal store cylinder to install it yourself, get in touch
For fantastic showering!
Delivers up to 10 litres of water in just 30 seconds...
at 55 degrees C!...
Tired of your gas heating system constantly needing...
maintenance, servicing, spare parts, attention?
For the perfect heating or hot water system!
no gas, no oil, no worries
no fumes, no flue pipes, no servicing!
Full central heating AND mains-pressure hot water for just...
£3,495 - fully installed*
Electric heating - wet and dry.
This is WET electric heating. It’s just simple radiators tied to an electric boiler.
Prices vary widely on your requirements and budget. With a wet system, we would install
an electric flow boiler. Depending on your heat requirements, you may even need two.
They are very small and easily located. However, the cable feeding them must come
from your mains fuseboard. Obviously, with a wet system, it is necessary to run pipework,
and an electrician is required to provide a mains feed for the boiler.
For many reasons, we recommend a DRY system.
A few words on the cost of going electric...
Electric central heating has been given a VERY bad press by the media on the subject
of cost. Unfortunately (as is often the case with ‘journalists’!) they forget to
take all costs into consideration. Let’s be clear from the start, electricity does
cost more than gas...BUT!...
1. The install cost of electricity can be HALF the cost of a gas central heating
2. There are no servicing costs with electricity.
3. There are no insurance costs (to cover breakdowns).
4. There are likely no boiler-replacement costs (which is often as much as £250 a
You can buy electricity for just 10p per kilowatt-hour. You must always shop around
for the lowest price - annually at least, but preferably every six months. Why overpay?
Real world data shows the cost of running dry underfloor electric heating to be less
than £89 a month (3 bed detached home) - 9,700 kWh a year.
Maybe you need your gas heating system converted to electric?...
From just £2,695 ALL inclusive
We marry a thermal store together with an electric flow boiler.
This means you get independent heating and hot water systems...
If one fails, you still have the other...
And don’t forget our...
ON ALL WORK
That means that should a part fail, all our labour charges are free...for 3 years!
And we promise to be there within 24 hours of you reporting the fault!*
Prices include all labour costs, all materials, and vat. The price also includes
basic electrical work, removing your current water heater, and disposal.
We use high-quality British
products wherever possible
The Electric Boiler Engineers
We are at 19 Cockney Hill, Reading. RG30 4HF
Call or text us on 0770 231 6157**
Or email us - email@example.com
37 years - serving you
Our system’s flow depends entirely on your mains pressure supply. We can assess your
flow free of charge. 20 litres per minute is recommended by us to be sufficient for
a considerable hot water supply without being unnecessarily wasteful. Systems are
limited at 3 bar pressure. If you currently don’t have a mains-pressure cylinder
installed, and your current pipes are fed by a water tank in the loft-space, they
would be subject to a 3-bar pressure when converted to carry mains-pressure water.
We cannot be held liable for their integrity. Full limescale protection can be provided
by a Scalgon LimeStop TS at £119 - please see www.limestop.co.uk. This will give
you GUARANTEED and unrivalled limescale protection for two years. After that time
it should be replaced - current price £104. Capacity of mains-pressure thermal store
hot water system in prices quoted is 160 litres. You may require overflow protection
(extra cost) if your current heater is not protected, but this is your choice. Alternatively,
purchase a water-leak detector for less than £10 together with a drip tray. Replacement
of wet gas heating system INCLUDES limescale and sludge protection, but excludes
cost of gas engineer to cut off your gas supply. We back up our installation with
a 3-year guarantee and 24-hour call-out protection. An annual check is required to
validate the manufacturer’s 10-year guarantee on AA thermal store cylinders. There
is a 5-year guarantee on WH cylinders. A deposit of 50% is required five days before
work commences – balance on completion. Free, no obligation quotations provided.
If you choose us, you will be provided with a binding contract, and your rights as
a consumer are respected and adhered to. You have the right to cancel your contract.
Terms & conditions apply - set out on your contract.
*Verbal conversation on phone, not message left. **Mobile phone rates apply.
Prices correct as of last website update - July 1, 2020 - and are subject to change.
This is DRY electric heating. As the name suggests, dry heating means no pipes carrying
water all around your home - with ALL the problems that come from that! Each 1kW
radiator costs £295. We can install a full 6-rad central heating system for just
£225 (labour cost) - meaning a full central heating system for just £1,995*
The designer radiators are bluetooth controlled via your phone. If you were to marry
this system to a mains-pressure thermal store, it would mean a full and independent
central heating and hot water system for just £3,490** - fully installed. Yes, that’s
less than HALF the cost of a comparable gas-boiler system! Price includes all cylinder
pipe connections, materials, and labour. And there are no floors or carpets to lift
- plus no boiler, no fumes, no servicing, no system maintenance, and no system insurance.
A full system is usually installed within one day!
*Ecostrad Allora contemporary designer radiators finished in white or anthracite,
with bluetooth phone control for individual room heating. Add additional radiators
for £295. To see all the Allora radiators, please click HERE
**British-made, high-quality, 160-litre, mains-pressure, thermal store hot water
cylinder. See above.